Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 390

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Restore
Card Failure
If the card is damaged, repeat the backup with a different card. If a backup is in
progress and fails, the system makes two additional attempts at the backup. At
the start of each attempt, a message appears with the percentage of the backup
that is completed. If the backup fails after three attempts, the screen shown
above appears. Repeat the backup procedure using a different file and/or
memory card.
Restore
Use this procedure to restore system conditions that were backed up onto a
translation memory card. The information in a backup file on the translation card
is copied to the system.
The restore procedure is necessary under the following conditions:
System RAM is corrupt.
A previously stored set of system conditions is preferred over the current
set.
The processor module is replaced.
After a System Erase (frigid start) has been performed.
The system software has been reinstalled.
The Inspect feature (Inspct or
backup files on the memory card prior to initiating the restore procedure. The
attributes included on the Inspect screen are the filename, the time and day of
the file backup/update, the location of the system programming port, and
) is available to view the attributes of the
Issue 1
August 1998
Page D-18