Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 206

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
800 NI-BRI Module Problems
Table 4–7. Continued
Result
Code Description
Testing was not
performed on this
facility because no
other Layer 3
initialized facility
was available in the
time allowed for
testing.
Testing was
inconclusive
because the line(s)
used to test this one
had problems.
Outgoing Voice Call Test
Place a voice call from the BRI line under test. Call either a working facility on
the system or a phone on the premises that is connected to the central office
(CO).
NOTE:
The 800 NI-BRI module must be restored (removed from the
Maintenance-Busy state) before performing this test. See
Module'' on page
Assign the BRI line to a button on an MLX display extension.
If using a facility on the system as a destination, also assign the
destination facility to a button on another MLX display phone.
Press the button associated with the BRI line under test.
Corrective Action
Layers 1, 2 and 3 are established. Correct the
known problems on the other facilities and
rerun the test.
Correct the known problems on other facilities
and rerun the test.
4-109.
Issue 1
August 1998
Page 4-94
''Restoring the