Lucent Technologies MERLIN LEGEND Release 6.1 Maintenance And Troubleshooting Manual page 286

MERLIN LEGEND Communications System Release 6.1
Maintenance and Troubleshooting 555-661-140
Checking Ports
Console Display/Instructions
The screen below appears only if the audit message is successfully
created and sent.
BChannel
Audit Initiated
Exit
After about four minutes, check the error logs.
If new PRI errors occur, contact your technical support
organization for help on interpreting the results and your action.
If no new PRI messages appear, the ends are most likely in
agreement.
The screen below appears when the message cannot be sent.
BChannel
Audit Failed
Exit
If this occurs, make sure an active call is in progress on the specified
B-channel and try the audit again.
YYYY
AuditCall
YYYY
Audit Call
Additional Information
xxxx = slot and port number entered
in Step 3.
xxxx = slot and port number entered
in Step 3.
Issue 1
August 1998
Page 5-40
PC