Wep Key Length; Clear (Network Config Mode); Show Wireless Network - D-Link DWL-8500AP Command Reference Manual

number of characters required for a valid WEP key, and therefore changing the WEP key
length will reset all keys.
Default
Format
Mode
ascii
hex
no wep key type
The version of this command returns the WEP key type to its default value.
no
Format
Mode

wep key length

This command configures the WEP key length in bits for the network. The configured key
length is used when the network security mode is set to WEP shared key. The WEP key length
affects the number of characters required for a valid WEP key, and therefore changing the
WEP key length will reset all keys.
Default
Format
Mode
no wep key length
The version of this command returns the WEP key length to its default value.
no
Format
Mode

clear (Network Config Mode)

This command restores a network configuration to default values.
Format
Mode

show wireless network

This command displays the network configuration parameters. If no parameters are specified,
a summary of the configured networks is displayed, otherwise the detailed configuration is
displayed.
Format
ASCII
wep key type {ascii | hex}
Network Config
Set WEP key type to ASCII.
Set WEP key type to hexadecimal.
no wep key type
Network Config
128
wep key length {64 | 128 | 152}
Network Config
no wep key length
Network Config
clear
Network Config
show wireless network [<1-64>]
4 Wireless Commands
Wireless Network Commands 167