Show Snmp User - D-Link DGS-510 Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch# show snmp group
GroupName: public
ReadView
NotifyView
IP access control list:
GroupName: public
ReadView
NotifyView
IP access control list:
GroupName: initial
ReadView
NotifyView
IP access control list:
GroupName: private
ReadView
NotifyView
IP access control list:
GroupName: private
ReadView
NotifyView
IP access control list:
Total Entries: 5
Switch#
This example shows how to display the SNMP engine ID.
Switch# show snmp engineID
Local SNMP engineID: 800000ab033c1e04a1b9e000
Switch#
63-15

show snmp user

This command is used to display information about the configured SNMP user.
show snmp user [USER-NAME]
Parameters
USER-NAME
Default
None.
Command Mode
Privileged EXEC Mode or Any Configuration Mode.
: CommunityView
: CommunityView
: CommunityView
: CommunityView
: restricted
: restricted
: CommunityView
: CommunityView
: CommunityView
: CommunityView
(Optional) Specifies the name of a specific user to display SNMP
information.
580
SecurityModel: v1
WriteView :
SecurityModel: v2c
WriteView :
SecurityModel: v3/noauth
WriteView :
SecurityModel: v1
WriteView : CommunityView
SecurityModel: v2c
WriteView : CommunityView