Show Vlan - D-Link DGS-1100-16/ME Reference Manual

Description
Parameters
Restrictions
Example usage:
To add ports 1-3 as tagged ports to the VLAN ID 1:

show vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's current VLAN settings:
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
The config vlan command allows the user to add or delete ports to
the port list of a previously configured VLAN. You can specify the
additional ports as tagging, untagging, or forbidden. The default is to
assign the ports as untagged.
name <vlan_name 8> − The name of the VLAN to be configured.
vlanid <vidlist > − The ID of the VLAN to which to add ports to.
add − Specifies that ports are to be added to a previously created
vlan.
delete - Specifies that ports are to be deleted from a previously
created vlan.
tagged − Specifies the additional ports as tagged.
untagged − Specifies the additional ports as untagged.
<portlist > − A port or range of ports to be added to or deleted from
the VLAN.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#config vlan vlanid 1 add
tagged 1-3
Command : config vlan vlanid 1 add tagged 1-3
Success.
DGS-1100-24P/ME:admin#
To display the current VLAN configuration on the Switch
show vlan {name <vlan_name 8> | vlanid <vidlist 1-4094> | ports
<portlist>}
The show vlan command displays summary information about each
VLAN including the VLAN ID, VLAN name, the Tagging/Untagging
status, and the Member/Non-member/Forbidden status of each port
that is a member of the VLAN.
name <vlan_name 8> − Specify the VLAN id to be displayed.
vlanid <vidlist 1-4094> − Specify the VLAN id to be displayed.
ports <portlist> − Specify the ports to be displayed.
None.
DGS-1100-24P/ME:admin#show vlan
Command : show vlan
VID : 1
80