Config Pvid; Show Vlan - D-Link DGS-1100-06/ME Cli Reference Manual

config pvid

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the PVID on the Switch:

show vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's current VLAN settings:
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
DGS-1100-06/ME:5# config vlan vlanid 3 add tagged 5
Command: config vlan vlanid 3 add tagged 5
Success
DGS-1100-06/ME:5#
To configure the pvid on the Switch.
config pvid <int 1-4094> ports <portlist>
The config pvid command configures the Group VLAN Registration
Protocol on the Switch.
<int 1-4094> − Specifies the PVID to be configured.
<portlist> − A port or range of ports which user want to configure
with.
Only administrator or operator-level users can issue this command.
DGS-1100-06/ME:5#config pvid 1 ports 2
Command: config pvid 1 ports 2
Success.
DGS-1100-06/ME:5#
To display the current VLAN configuration on the Switch
show vlan {<int 1-4094>}
The show vlan command displays summary information about each
VLAN including the VLAN ID, VLAN name, the Tagging/Untagging
status, and the Member/Non-member/Forbidden status of each port
that is a member of the VLAN.
<int 1-4094> − Specify the VLAN id to be displayed.
None.
DGS-1100-06/ME:5# show vlan
Command: show vlan
VID
VLAN Type
Member Ports
: 1 VLAN NAME
: Static
: 1-6
126
: default