Show Cfm Fault - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Port
Direction
CFM Port Status
MAC Address
MEP State
CCM State
PDU Priority
Fault Alarm
Alarm Time
Alarm Reset Time
Highest Fault
AIS State
AIS Period
AIS Client Level
AIS Status
LCK State
LCK Period
LCK Client Level
LCK Status
Out-of-Sequence CCMs: 0 received
Cross-connect CCMs
Error CCMs
Normal CCMs
Port Status CCMs
If Status CCMs
CCMs transmitted
In-order LBRs
Out-of-order LBRs
Next LTM Trans ID
Unexpected LTRs
LBMs Transmitted
AIS PDUs
AIS PDUs Transmitted: 0
LCK PDUs
LCK PDUs Transmitted: 0
Remote
MEPID MAC Address
------ ----------------- ------ --- ------- ---------- --- -------------------
2 FF-FF-FF-FF-FF-FF FAILED No
DGS-3120-24TC:admin#

19-15 show cfm fault

Description
This command is used to display all the fault conditions detected by the MEPs contained in the
specified MA or MD. This display provides the overview of the fault status by MEPs.
: 1:2
: Inward
: Enabled
: 00-01-02-03-04-02
: Enabled
: Enabled
: 7
: Disabled
: 250 centisecond((1/100)s)
: 1000 centisecond((1/100)s)
: Some Remote MEP Down
: Disabled
: 1 Second
: Invalid
: Not Detected
: Disabled
: 1 Second
: Invalid
: Not Detected
: 0 received
: 0 received
: 0 received
: 0 received
: 0 received
: 71
: 0 received
: 0 received
: 0
: 0 received
: 0
: 0 received
: 0 received
Status RDI PortSt
No
196
IfSt LCK Detect Time
No No 2011-07-13 12:00:00