Chapter 12 Basic Commands Command List; Create Account - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Chapter 12 Basic Commands Command
create account [admin | operator | power_user | user] <username 15> {encrypt [plain_text |
sha_1] <password>}
config account <username> {encrypt [plain_text | sha_1] <password>}
show account
delete account <username>
show switch
enable telnet {<tcp_port_number 1-65535>}
disable telnet
enable web {<tcp_port_number 1-65535>}
disable web
reboot {force_agree}
reset {[config | system]} {force_agree}
config firmware image {unit <unit_id>} <pathname> boot_up
create ipif <ipif_name 12> {<network_address>} <vlan_name 32> {secondary | state [enable |
disable] | proxy_arp [enable | disable] {local [enable | disable]}}
config ipif <ipif_name 12> [{ipaddress <network_address> | vlan <vlan_name 32> | state [enable |
disable]} | proxy_arp [enable | disable] {local [enable | disable]} | bootp | dhcp | ipv6
[ipv6address <ipv6networkaddr> | state [enable | disable]] | ipv4 state [enable | disable] |
dhcpv6_client [enable | disable] | dhcp_option12 [hostname <hostname 63> | clear_hostname
| state [enable|disable]]]
delete ipif [<ipif_name 12> {ipv6address <ipv6networkaddr>} | all]
enable ipif [<ipif_name 12> | all]
disable ipif [<ipif_name 12> | all]
show ipif {<ipif_name 12>}
enable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
disable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
show ipif_ipv6_link_local_auto {<ipif_name 12>}
12-1

create account

Description
This command is used to create user accounts. The username is between 1 and 15 characters,
the password is between 0 and 15 characters. It is case sensitive. The number of account (include
admin and user) is up to 8.
Format
create account [admin | operator | power_user | user] <username 15> {encrypt [plain_text |
sha_1] <password>}
Parameters
admin - Specify the name of the admin account.
operator - Specify the name for a operator user account.
power_user – Specify the name for a Power-user account.
user - Specify the name of the user account.
<username 15> - Enter the username used here. This name can be up to 15 characters long.
List
(EI Mode Only)
(EI Mode Only)
137
(EI Mode Only)
(EI Mode Only)
(EI Mode Only)
(EI Mode Only)
(EI Mode Only)