Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 90

JUNOSe 11.0.x Multicast Routing Configuration Guide
show ip igmp mapped-oif
host1# show ip igmp mapped-oif
OIF Oper Group Address
--------------- ---- --------------- --------------- --------------- ----------
ATM5/0.120 Up 232.1.1.2
ATM5/0.121 Up 232.1.1.1
232.1.1.2
Counts: 3 source-group mappings
show ip igmp membership
68
Monitoring IGMP
QPTime Time in seconds that the interface waits before declaring itself as
the querier
Count Total number of IGMP interfaces
Example
host1:boston# show ip igmp interface brief
Interface Intf Address
-------------- ----------
fastEthernet0/0 192.168.1.250/24
atm3/0.2 21.1.1.1/8
Count: 2 interfaces
See show ip igmp interface.
Use to display the current mappings to all mapped outgoing interfaces or to the
specified mapped outgoing interface.
Field descriptions
OIF Outgoing interface used in an OIF map
Oper Operation status of the outgoing interface
Group Address Multicast group IP address associated with the OIF
Source Address Source IP address associated with the OIF
Join I/F IGMP interface associated with the OIF
Map Name Name of the map associated to the OIF
Counts Number of source-group mappings to OIFs
Example
Source Address
10.1.1.10
*
10.1.1.11
See show ip igmp mapped-oif.
Ver State Querier
--- ------
2 Querier
2 Querier
Join I/F Map Name
ATM5/0.12 OIFMAP
ATM5/0.13 OIFMAP
ATM5/0.12 OIFMAP
ATM5/0.13 OIFMAP
ATM5/0.12 OIFMAP
ATM5/0.13 OIFMAP
QTime QPTime
------------- ----- ---
192.168.1.250 28 0
21.1.1.1 26 0