Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 143

Address IP address of outgoing interface
Interface Type and specifier of the interface. For details about interface
types and specifiers, see Interface Types and Specifiers in JUNOSe Command
Reference Guide.
Joined as Type of mapping
(S, G) Mapping from a specific source to a specific group
(*, G) Mapping from any source to a specific group
(*, * , RP) Mapping from any source to any group
Join expires Number of seconds before the (S,G) membership expires
Count of entries Total counts of (S,G) pair mappings
Example
host1:2# show ip pim sparse-mode sg-state
<*, 224.0.1.40>
Group-to-RP mapping: 224.0.0.0/240.0.0.0
RPF Route: 123.0.0.0/255.0.0.0
Oifs:
Auto RP Discovery SELF oif.
Joined as <*, G>
<*, 225.1.2.3>
Group-to-RP mapping: 224.0.0.0/240.0.0.0
RPF Route: 123.0.0.0/255.0.0.0
Oifs:
Address: 78.7.7.7
Local group membership present.
<*, 235.1.1.1>
Group-to-RP mapping: 224.0.0.0/240.0.0.0
RPF Route: 123.0.0.0/255.0.0.0
Oifs:
Address: 78.7.7.7
Local group membership present.
<118.1.33.34, 232.0.0.1>
SSM Group
RPF Route: 118.1.0.0/255.255.0.0
Oifs:
Register Oif to RP: 141.0.0.2 suppressed for SSM Group.
Address: 134.0.0.1
Joined as <S, G>
<118.1.33.35, 232.0.0.1>
SSM Group
RPF Route: 118.1.0.0/255.255.0.0
Oifs:
Register Oif to RP: 141.0.0.2 suppressed for SSM Group.
Address: 134.0.0.1
Joined as <S, G>
<10.0.1.8, 235.1.1.1>
Group-to-RP mapping: 224.0.0.0/240.0.0.0
RPF Route: 10.0.0.0/255.0.0.0
Oifs:
Address: 78.7.7.7
Joined as <*, G>
Count of entries - <S, G>
Chapter 3: Configuring PIM for IPv4 Multicast
RP: 123.0.0.1
IIF: 106.0.7.3
RP: 123.0.0.1
IIF: 106.0.7.3
Interface: loopback7
RP: 123.0.0.1
IIF: 106.0.7.3
Interface: loopback7
IIF: 118.1.0.1 (Directly attached)
Interface: ATM3/0.104
Join Expires: 161
IIF: 118.1.0.1 (Directly attached)
Interface: ATM3/0.104
Join Expires: 161
EntryExpires: 143
RP: 123.0.0.1
IIF: 106.0.7.3
Interface: loopback7
: 3
UpNbr: 106.0.3.7
UpNbr: 106.0.3.7
UpNbr: 106.0.3.7
UpNbr: 106.0.3.7
121
Monitoring PIM