Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 222

JUNOSe 11.0.x Multicast Routing Configuration Guide
show ipv6 mld groups
200
Monitoring MLD
total interfaces Number of interfaces on which you started MLD
enabled Number of interfaces on which MLD is enabled
disabled Number of interfaces on which MLD is disabled
learned groups Number of multicast groups that the VR has discovered
MLD Statistics Rcvd Statistics for MLD messages received
total Number of MLD messages received
checksum errors Number of MLD messages received with checksum
errors
unknown types Number of messages received that are not multicast
listener queries, multicast listener reports, or multicast listener done
messages
discards Number of multicast listener discards
queries Number of multicast listener queries
reports Number of multicast listener reports
leaves Number of done messages
MLD Statistics Sent Number of multicast listener queries sent
Example
host1:boston#show ipv6 mld
Routing Process MLD, Administrative state enabled, Operational state
enabled
2 total interfaces, 2 enabled, 0 disabled
2 enabled interfaces performing graceful restart
1 learned groups
MLD Statistics:
Rcvd: 1 total, 0 checksum errors, 0 unknown types, 0 discards
0 queries, 1 reports, 0 leaves
Sent: 2 total
See show ipv6 mld.
Use to display statically joined and directly connected groups learned through
MLD.
Field descriptions
Grp Address Address of the multicast group
Interface Interface that discovered the multicast group
oif-map Name of the OIF map and the mapped OIF interface, if a group
or source has been mapped to an OIF
State MLD version of the group