Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 227

host1:boston# show ipv6 mld interface brief
Interface Intf Address
--------------- --------------- --- ---------- ------------- ------ ------
ATM2/0.103 130.0.0.1/24
ATM5/0.102 131.0.0.1/24
Counts: 0 down, 0 init state, 2 querier, 0 non-querier, 2 Total
show ipv6 mld mapped-oif
host1# show ipv6 mld mapped-oif
OIF Oper Group Address
--------------- ---- --------------- --------------- --------------- ----------
ATM5/0.120 Up ff3e::2
ATM5/0.121 Up ff3e::1
ff3e::2
Counts: 3 source-group mappings
Querier IPv6 address of the querier on the network to which this interface
connects
QTime Remaining time interval at which this interface sends query
messages
QPTime Remaining time that the interface waits before declaring itself as
the querier
Example
Ver State
2 Querier 130.0.0.1
2 Querier 130.0.0.1
See show ipv6 mld interface.
Use to display the current mappings to all mapped outgoing interfaces or to the
specified mapped outgoing interface.
Field descriptions
OIF Outgoing interface used in an OIF map
Oper Operation status of the outgoing interface
Group Address Multicast group IP address associated with the OIF
Source Address Source IP address associated with the OIF
Join I/F MLD protocol interface associated with the OIF
Map Name Name of the map associated to the OIF
Counts Number of source-group mappings to OIFs
Example
Source Address
10::10
*
10::11
See show ipv6 mld mapped-oif.
Chapter 6: Configuring Multicast Listener Discovery
Querier QTime QPTime
3(7) 0
101(7) 0
Join I/F Map Name
ATM5/0.12 OIFMAP
ATM5/0.13 OIFMAP
ATM5/0.12 OIFMAP
ATM5/0.13 OIFMAP
ATM5/0.12 OIFMAP
ATM5/0.13 OIFMAP
205
Monitoring MLD