Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 88

JUNOSe 11.0.x Multicast Routing Configuration Guide
66
Monitoring IGMP
Group Count Number of IGMP groups that the interface has accepted
IOA packet replication Hardware multicast packet replication interface to
which egress multicast packets on this interface are redirected
Interface statistics Rcvd Information about IGMP messages received on
this interface
reports Number of group membership reports received
leaves Number of group leave messages received
wrong version queries Number of group membership queries received
from devices running a different version of IGMP
Interface statistics Sent Number of IGMP messages this interface has sent
Interface statistics Groups learned Number of groups this interface has
discovered
Counts Breakdown of IGMP interfaces
down Number of interfaces down
init state Number of interfaces in the initialization state
querier Number of querier interfaces
non-querier Number of non-querier interfaces
Total Total number of IGMP interfaces
Example 1
host1:boston#show ip igmp interface
Interface ATM2/1.15 address 15.0.0.2/255.255.255.0
Administrative state enabled, Operational state enabled
Interface parameters:
Version 2
State Querier
Query Interval 125 secs, 53 secs before the next query
Other querier present interval 250 secs
Maximum response time 100 (in 10ths of a second)
Last member query interval 10 (in 10ths of a second)
Robustness 3
Interface defaults to global promiscuous mode
No inbound access group
No inbound access source-group
No inbound apply-oif-map
Immediate Leave: disabled
Explicit Host Tracking: enabled
Max-Group limit: No Limit
Admission-Bandwidth limit: No Limit
Group Count: 1
Interface statistics:
Rcvd: 0 reports, 0 leaves, 0 wrong version queries
Sent: 1 queries
Groups learned: 1