Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 141

show ip pim rp
show ip pim rp-hash
1.1.1.1 FastEthernet1/1
Neighbor
Addr Interface Name
-------- ---------------
1.1.1.1 FastEthernet1/1
See show ip pim neighbor.
Use to display information about PIM group-to-RP mappings.
Specify the address of a group to view PIM group-to-RP mappings for a particular
group.
Specify the mapping keyword to display all group-to-RP mappings that the router
has recorded.
Field descriptions
Group(s) Prefix of the multicast group
RP IP address of RP router for the multicast group
priority Priority of the router
via Method by which the RP router was assigned: AutoRP, Static RP, or
BSR
expiryTime Time in seconds at which the RP mapping becomes invalid,
unless the mapping agent (access list) reassigns the RP router to this group
Example 1
host1:8#show ip pim rp mapping
PIM Group-to-RP mapping(s)
Group(s) 224.0.0.0/4
RP 122.0.0.1, priority 0,
Group(s) 224.0.1.39/32 (negative)
RP 122.0.0.1, priority 0,
Group(s) 224.0.1.40/32 (negative)
RP 122.0.0.1, priority 0,
Example 2
host1:8#show ip pim rp mapping
PIM Group-to-RP mapping(s)
Group(s) 224.0.0.0/4
RP 134.0.0.1, priority 0, via Static, from access-list 1
Group(s) 232.0.0.0/16
RP 134.0.0.1, priority 0, via BSR, expires in 121 seconds
See show ip pim rp.
Chapter 3: Configuring PIM for IPv4 Multicast
00:03:16 00:01:30 2
Uptime Expires Ver
-------- -------- ---
00:00:07 00:01:39 2
via AutoRP, expiryTime 88
via AutoRP (Negative), expiryTime 88
via AutoRP (Negative), expiryTime 88
Monitoring PIM
Sparse up
Mode BFD
------ ----
Sparse down
119