Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 138

JUNOSe 11.0.x Multicast Routing Configuration Guide
show ip pim interface
116
Monitoring PIM
Use to display information for each (Source, Group) pair for PIM dense mode.
Field descriptions
(Source, Group) pair IP addresses of multicast source and group
EntryExpires Time until the (S,G) pair entry expires
RPF Route Reverse-path forwarding route
IIF IP address of incoming interface
UpNbr IP address of upstream neighbor
Pruned Oifs Outgoing interfaces that have been pruned
Address IP address of outgoing interface
IfId Index of the interface
Pruned due to Reason for prune: assert or explicit prune
Pruned time remaining Time in seconds until the prune expires
Example
host1:8#show ip pim dense-mode sg-state
PIM DM route table and pruned oif information
<122.0.0.1, 224.0.1.39>
RPF Route: 122.0.0.0/255.0.0.0
Pruned Oifs:
Address: 108.0.8.5
Pruned due to assert
Pruned time remaining 129
<130.0.0.2, 224.0.1.39>
RPF Route: 130.0.0.0/255.0.0.0
Pruned Oifs:
Address: 108.0.8.5
Pruned due to assert
Pruned time remaining 130
<121.0.0.1, 224.0.1.40>
RPF Route: 121.0.0.0/255.0.0.0
Pruned Oifs:
Address: 108.0.8.5
Pruned due to assert
Pruned time remaining 133
See show ip pim dense-mode sg-state.
Use to display information about PIM interfaces.
Specify no keywords or variables to view information about all PIM interfaces.
Provide an interface type and specifier (such as atm 3/0) to display information
about that interface only. For details about interface types and specifiers, see
Interface Types and Specifiers in JUNOSe Command Reference Guide.
EntryExpires: 99
IIF: 107.0.8.4
IfId: 95
EntryExpires: 100
IIF: 107.0.8.4
IfId: 95
EntryExpires: 102
IIF: 107.0.8.4
IfId: 95
UpNbr: 107.0.4.8
UpNbr: 107.0.4.8
UpNbr: 107.0.4.8