Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 198

JUNOSe 11.0.x Multicast Routing Configuration Guide
show mroute port count
NOTE: This command displays information for mroutes on a port across all virtual
routers.
show ipv6 mroute count
176
Monitoring IPv6 Multicast Settings
Group Address Source Address
--------------- ------------ ----------- --------- -----
232.0.0.1 51.0.0.1
232.0.0.2 51.0.0.1
232.0.0.3 51.0.0.1
Counts: 3 (S, G) entries
0 (*, G) entries
See show ipv6 mroute.
Use to display the mroute port outgoing interface, limits, and counts.
Field descriptions
Port Slot/port value on the router
Limit None (reserved for future functionality)
Count Number of mroute outgoing interfaces on the specified port
BW bps Bandwidth limit (in bits per second)
Admitted Bandwidth admitted on the port (in bits per second)
Example
host1#show mroute port count
BW Priority
Port Limit Count
----- ----- -----
1/1/0 None 1
1/1/1 None 2
See show mroute port count.
Use to display information about the number of groups and sources.
Specify a multicast group address or both a multicast group address and a
multicast source address to display information about a particular multicast
forwarding entry.
RPF route RPF Iif
51.0.0.0/24 ATM3/1.17
51.0.0.0/24 ATM3/1.17
51.0.0.0/24 ATM3/1.17
bps BW bps Hysteresis
----- -------- ----------
None None 85
15000 10000 85
#Oifs
0
0
0
Admitted
--------
0
2000