Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 262

JUNOSe 11.0.x Multicast Routing Configuration Guide
show ipv6 pim spt-threshold
240
Monitoring PIM
host1:2#show ipv6 pim sparse-mode unicast-route
PIM SM unicast route table information
Route
---------------------------------------------------------------------------
::122:0 /96
Count of entries: 1
See show ipv6 pim sparse-mode unicast-route
Use to display the threshold for switching to the shortest path tree at a PIM
designated router.
Field descriptions
Access List Name Name of the IPv6 access list that specifies the groups to
which the threshold applies
SptThreshold (in kbps) Value at which PIM sparse mode should switch from
a shared tree to an SPT. A value of infinity indicates that PIM sparse mode
should never switch to an SPT.
Example
host1:2#show ipv6 pim spt-threshold
Access List Name
-------------------------------------------------------
1
See show ipv6 pim spt-threshold.
RpfNbr Iif
::122:1
SptThreshold(in kbps)
infinity
Pref Metric
255 1