Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 86

JUNOSe 11.0.x Multicast Routing Configuration Guide
show ip igmp interface
64
Monitoring IGMP
231.1.1.1 FastEthernet1/1 Version3
Excluded Sources:
51.0.0.1
51.0.0.2
51.0.0.3
Counts: 5 version-3, 0 version-2, 0 version-1, 0 check state, 0 disabled
(5 total)
0 excluded
Source-groups: 3 included, 3 excluded
Example 2 With OIF mapping
host1:boston#show ip igmp groups
Grp Address Interface
------------- --------------- ----------- ------------ ------ ------
232.1.1.1 ATM5/0.12
oif-map OIFMAP ATM5/0.121
232.1.1.1 ATM5/0.13
oif-map OIFMAP ATM5/0.121
232.1.1.2 ATM5/0.12
Included Sources:
10.1.1.2 oif-map OIFMAP self
10.1.1.10 oif-map OIFMAP ATM5/0.120
10.1.1.11 oif-map OIFMAP ATM5/0.121
232.1.1.2 ATM5/0.13
Included Sources:
10.1.1.2 oif-map OIFMAP self
10.1.1.10 oif-map OIFMAP ATM5/0.120
10.1.1.11 oif-map OIFMAP ATM5/0.121
Counts: 4 version-3, 0 version-2, 0 version-1, 0 check state, 0 disabled
(4 total)
0 excluded
Source-groups: 6 included, 0 excluded
See show ip igmp groups.
Use to display IGMP information for interfaces on which you enabled IGMP.
Specify the brief keyword to see a summary of the information.
Specify the count keyword to see the number of IGMP interfaces.
Specify the group address keyword to see information for interfaces that belong
to that group.
Field descriptions
Interface Type of interface and interface specifier. For details about interface
types and specifiers, see Interface Types and Specifiers in JUNOSe Command
Reference Guide.
address IP address of the interface
Administrative state Status of the interface in the software: enabled or
disabled
17.0.0.2
State Reporter
Version3 1.1.1.2
Version3 1.1.1.3
Version3 1.1.1.2
Version3 1.1.1.3
44 0
0
0
0
ExpTim oldHTo
371 0
375 0
373 0
373
373
373
375 0
375
375
375