Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 161

show ip dvmrp mroute
show ip dvmrp neighbor
SourceAddress:
Network/Mask:
Received Bad Packets:
Received Bad Routes:
Routes Sent:
Administrative State:
Summary Address(es)
auto-summary:
metric-offset in:
metric-offset out:
announce-filter:
accept-filter(s)
Example 2
host1:boston#show ip dvmrp interface brief
Interface
atm5/0.14
atm5/0.15
See show ip dvmrp interface.
Use to display information about DVMRP routes to multicast groups.
Field descriptions
(S,G) pair Source, Group pair value
Uptime Time, in seconds, that this (S, G) pair entry has been in the routing
table
Upstream Prune Whether the router has sent prune messages for this group
RPF Interface Interface that provides the shortest path back to the source
Outgoing interface list Types and specifiers of interfaces through which
the VR forwards DVMRP messages, such as atm3/0. For details about interface
types and specifiers, see Interface Types and Specifiers in JUNOSe Command
Reference Guide.
Example
host1:boston#show ip dvmrp mroute
IP DVMRP Multicast Routing Table
(40.0.0.0/16, 228.1.1.1)
Upstream Prune: none
RPF Interface
atm5/0.40
Outgoing interface list:
atm5/0.31
See show ip dvmrp mroute.
1.0.0.1
1.0.0.1/24
Enabled
None Configured
Disabed
None Configured
SourceAddress Network/Mask
14.0.1.1 14.0.1.1/8
15.0.1.1 15.0.1.1/8
Uptime: 77
Chapter 4: Configuring DVMRP
0
0
0
1
0
None
RBdPk RBdRt SntRt
0 0 2
0 0 2
139
Monitoring DVMRP