Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 85

show ip igmp groups
Total number of group membership queries sent
Example
host1:boston#show ip igmp
Routing Process IGMP, Administrative state enabled, Operational state
enabled
2 total interfaces, 2 enabled, 0 disabled
0 enabled interfaces performing graceful restart
2 learnt groups
IGMP Statistics:
Rvcd: 1 total, 0 checksum errors, 0 unknown types
0 queries, 1 reports, 0 leaves
Sent: 11 total
See show ip igmp.
Use to display statically joined and directly connected groups learned through
IGMP.
Field descriptions
Grp Address Address of the multicast group
Interface Interface that discovered the multicast group
oif-map Name of the OIF map and the mapped OIF interface, when a group
or source has been mapped to an OIF
State IGMP version on the interface
ExpTim Time, in seconds, at which the router stops polling for more
members of this group
oldHTo Time at which the router stops polling for more IGMPv1 members
of a group. If this value is 0, the interface has received no IGMPv1 reports
for the group.
Included Sources Sources included in the multicast group
Excluded Sources Sources excluded from the multicast group
Counts Number of source-group mappings by version and state
Example 1 Without OIF mapping
host1:boston#show ip igmp groups
Grp Address Interface
------------- --------------- ----------- ------------ ------ ------
228.1.1. FastEthernet1/1 Version3
228.1.1.2 FastEthernet1/1 Version3
228.1.1.3 FastEthernet1/1 Version3
230.1.1.1 FastEthernet1/1 Version3
Included Sources:
51.0.0.1
51.0.0.2
51.0.0.3
Chapter 2: Configuring IGMP
State Reporter
17.0.0.2
17.0.0.2
17.0.0.2
17.0.0.2
Monitoring IGMP
ExpTim oldHTo
44 0
50 0
48 0
44 0
44
44
44
63