Disabling And Removing Dvmrp - Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual

Disabling and Removing DVMRP

You can disable DVMRP on a VR or an interface without removing the configuration.
You can also remove DVMRP from a VR or an interface.
disable
ip dvmrp
ip dvmrp disable
router dvmrp
Use the no version to disable the exchange of DVMRP unicast routes on an
interface not owned by DVMRP.
See ip dvmrp unicast-routing.
Use to disable DVMRP processing on a VR without removing the DVMRP
configuration. By default, DVMRP processing is enabled.
Example
host1:boston(config-router)#disable
Use the no version to reenable DVMRP processing on a VR.
See disable.
Use to activate DVMRP on an interface.
This command automatically creates and enables DVMRP processing on the
current VR.
Issue this command to identify this interface as one that DVMRP owns.
Example
host1:boston(config-if)#ip dvmrp
Use the no version to remove DVMRP from an interface.
See ip dvmrp.
Use to disable DVMRP processing on an interface without removing the DVMRP
configuration.
Example
host1:boston(config-if)#ip dvmrp disable
Use the no version to reenable DVMRP processing on an interface.
See ip dvmrp disable.
Chapter 4: Configuring DVMRP

Disabling and Removing DVMRP

135