Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 60

JUNOSe 11.0.x Multicast Routing Configuration Guide
show ip multicast routing
show mroute port count
38
Monitoring IP Multicast Settings
Use to display a summary of information about multicast protocols enabled on
the router.
Field descriptions
Protocol Name of the multicast protocol
Registered Interfaces Number of interfaces on which the protocol is
configured
Owned Interfaces Number of interfaces that a protocol owns. If you
configure only IGMP on an interface, IGMP owns the interface. However, if
you configure IGMP and either PIM or DVMRP on the same interface, PIM
or DVMRP owns the interface.
Type Mode of the multicast protocol
For DVMRP Dense
For PIM Sparse, dense, or sparse-dense
For IGMP Local
Count Number of multicast protocols on the VR
Example
host1#show ip multicast protocols brief
Protocol Registered
Interfaces
--------- ----------
Pim 2
Igmp 1
Count: 2 protocols
See show ip multicast protocols.
Use to display information about the status of IP multicast on the VR.
Example
host1#show ip multicast routing
Multicast forwarding is enabled on this router
Multicast graceful restart is complete (timer 0 seconds) on this router
Multicast cache-miss processing is enabled on this router
See show ip multicast routing.
Owned Type
Interfaces
---------- -------------------
2 Sparse Dense
0 Local