Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 200

JUNOSe 11.0.x Multicast Routing Configuration Guide
show ipv6 mroute summary
178
Monitoring IPv6 Multicast Settings
RPF route: addr/mask, incoming interface
neighbor address, owner route-owner
Incoming interface list:
Interface (addr/mask), State/Owner [(RPF IIF)]
Outgoing interface list:
Interface (addr/mask), State/Owner, Uptime/Expires
(10:0:0:1:1::, ff0e::1) uptime 0 01:05:23
Admission bandwidth:
RPF route: 10:0:0:1::/64, incoming interface ATM2/3.1001
neighbor 10:0:0:1::1, owner Local
Incoming interface list:
ATM2/3.1001 (10:0:0:1::1/64), Accept/Pim (RPF IIF)
Outgoing interface list:
ATM2/0.200 (21:2:2:21::2:1/60), Forward/Pim, 0 01:05:23/never
Statistics:
Received : 346 pkts, 22144 bytes
Forwarded : 346 pkts, 22144 bytes
Rcvd on OIF: 0 pkts
(10:0:0:1:2::, ff0e::1) uptime 0 01:05:23
RPF route: 10:0:0:1::/64, incoming interface ATM2/3.1001
neighbor 10:0:0:1::1, owner Local
Incoming interface list:
ATM2/3.1001 (10:0:0:1::1/64), Accept/Pim (RPF IIF)
Outgoing interface list:
ATM2/0.200 (21:2:2:21::2:1/60), Forward/Pim, 0 01:05:26/never
Statistics:
Received : 346 pkts, 22144 bytes
Forwarded : 346 pkts, 22144 bytes
Rcvd on OIF: 0 pkts
See show ipv6 mroute.
Use to display a summary of all or specified multicast routes.
Specify a multicast group IP address or both a multicast group IP address and a
multicast source IP address to display information about a particular multicast
forwarding entry.
Field descriptions
Group Address IP address of the multicast group
Source Address IP address of the multicast source
RPF Route IP address and network mask of the RPF route
RPF Iif Type and identifier for the incoming interface for the RPF route
#Oifs Number of outgoing interfaces
Counts Numbers of types of (S,G) mappings
(S,G) Number of (S,G) entries
(*,G) Number of (*,G) entries
Example