Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 162

JUNOSe 11.0.x Multicast Routing Configuration Guide
140
Monitoring DVMRP
Use to display information about DVMRP neighbors.
Specify the brief keyword to view a summary of information.
Field descriptions
Neighbor Address/NbrAddress IP address of the neighbor
Interface Interface type and specifier, such as atm3/0. For details about
interface types and specifiers, see Interface Types and Specifiers in JUNOSe
Command Reference Guide.
Neighbor upTime/UpTime Length of time, in seconds, that this router has
been a neighbor
Neighbor Major Version/Maj Major number of the DVMRP version on the
neighbor
Neighbor Minor Version/Min Minor number of the DVMRP version on the
neighbor
Neighbor Capabilities/Cap Capability of the neighbor
Prune/P Ability to send prune messages
GenerationId/G Ability to create a generation ID number
Mtrace/M Ability to trace multicast routes
Netmask/N Ability to send prunes and grafts with a network mask
address
Neighbor State/State Status of communications with the neighbor
Active Router is able to communicate with this neighbor
Down Neighbor is down
Ignoring Router is not accepting messages from this neighbor
Oneway Router is receiving messages from the neighbor, but the
neighbor does not include the router's IP address in the messages. This
state can indicate a starting transition, or a problem.
Generation ID Number that the neighbor generates each time it boots;
when the number changes, the VR discards all information previously learned
from the router.
Routes Received Number of routes received from this neighbor
Bad Routes Received Number of bad routes received from this neighbor
Bad Packets Received Number of bad packets received from this neighbor
Example 1
host1:boston# show ip dvmrp neighbor
Neighbor Address:
Interface:
Neighbor upTime:
14.0.0.1
atm5/0.14
28