Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 228

JUNOSe 11.0.x Multicast Routing Configuration Guide
show ipv6 mld oif-map
show ipv6 mld membership
206
Monitoring MLD
Use to display all outgoing interface (OIF) maps or the OIF map for the specified
map name.
Field descriptions
Map Name Name of the map associated to the show output
Group Prefix Multicast group IPv6 prefix
Source Prefix Source IPv6 prefix
OIF Outgoing interface associated with the group and source prefix
Example
host1#show ipv6 mld oif-map
Map Name
------------------ ------------------ ------------------ ------------------
OIFMAP ff3e::/112
ff3e::/112
ff3e::/112
ff3e::3/128
ff3e::4/128
See show ipv6 mld oif-map.
Use to display MLD membership information for multicast groups and (S, G)
channels.
Specify the brief keyword to see a summary of the information.
Specify the tracked keyword to see interface information only for interfaces
where explicit host tracking is enabled.
Field descriptions
Group Multicast group or (S, G) channel
Source (S, G) entries that are forwarding traffic
Reporter Hosts that requested including sources or that have not requested
excluding sources. If listed under a group, host that sent exclude reports for
the group. If listed under a source, host that requested traffic from this source
for the group. For any (S, G), if listed under a source, indicates hosts
interested in the traffic for this (S, G).
ExpTim Expiration time
Flags
Group Prefix Source Prefix
::/0
10::2/128
10::10/128
::/0
::/0
OIF
ATM5/0.121
self
ATM5/0.120
ATM5/0.130
ATM5/0.130