Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 226

JUNOSe 11.0.x Multicast Routing Configuration Guide
show ipv6 mld interface brief
204
Monitoring MLD
Explicit Host Tracking: enabled
Max-Group limit: No Limit
Admission-Bandwidth limit: No limit
IOA Packet Replication: None
Group Count: 1
Interface statistics:
Rcvd: 2 reports, 0 leaves, 0 wrong version queries
Sent: 2 queries
Groups learned: 1
Counts: 0 down, 0 init state, 1 querier, 0 non-querier, 1 Total
Example 2
host1#show ipv6 mld interface gigabitEthernet 3/0.0
Interface GigabitEthernet3/0.0 address 10.1.1.1/255.255.255.0
Administrative state enabled, Operational state enabled
Interface parameters:
Version 1
State Querier
Query Interval 125 secs, 123 secs before the next query
Other querier present interval 250 secs
Maximum response time 100 (in 10ths of a second)
Last member query interval 10 (in 10ths of a second)
Robustness 3
No inbound access group
No inbound access source-group
No inbound apply-oif-map
Immediate Leave: disabled
Explicit Host Tracking: enabled
Max-Group limit: No Limit
Group Count: 0
IOA packet replication gigabitEthernet 3/8.1
Interface statistics:
Rcvd: 0 reports, 0 leaves, 0 wrong version queries
Sent: 14 queries
Groups learned: 0
Counts: 0 down, 0 init state, 1 querier, 0 non-querier, 1 Total
See show ipv6 mld interface.
Use to display a summary of MLD information for interfaces on which you
enabled MLD.
Field descriptions
Interface Type of interface and interface specifier. For details about interface
types and specifiers, see Interface Types and Specifiers in JUNOSe Command
Reference Guide.
Intf Address IPv6 link-local address of the interface
Ver MLD version
State Function of the interface: querier or nonquerier