Configuring Dvmrp Summary Addresses - Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual

For e series broadband services routers - multicast routing configuration
Hide thumbs Also See for JUNOSE 11.0.X MULTICAST ROUTING:
Table of Contents

Advertisement

Configuring DVMRP Summary Addresses

You can configure an interface to advertise a summary address with a known metric
rather than a more specific route. DVMRP advertises the summary address if the
DVMRP routing table contains a more specific route that matches the address and
mask of the summary address.
If you want to advertise all routes rather than a summary, disable automatic
summarization on the interface (no ip dvmrp auto-summary). By default, the router
automatically summarizes DVMRP routes. DVMRP automatic summarization maps
a unicast subnet route to a classful network number route when the subnet has a
different network number from the IP address of the interface (or tunnel) over which
the advertisement travels. If the interface is unnumbered, the router compares the
network number of the numbered interface to the IP address to which the
unnumbered interface points.
If you configure a summary address on an interface and do not disable automatic
summarization, the interface advertises the least-specific address.
ip dvmrp auto-summary
ip dvmrp summary-address
Use the no version to disable a filter.
See ip dvmrp accept-filter.
Use to reenable the router to summarize routes automatically for this interface.
By default, automatic summarization is enabled.
Example
host1:boston(config-if)#ip dvmrp auto-summary
Use the no version to disable automatic summarization for this interface.
See ip dvmrp auto-summary.
Use to advertise DVMRP summary addresses on an interface. By default, an
interface advertises only summary addresses generated by automatic
summarization.
If you configure multiple overlapping summary addresses on an interface, the
one with the shortest mask takes preference.
Use the metric keyword to specify a DVMRP metric (hop count); the default
metric value is 1.
Example
host1:boston(config-if)#ip dvmrp summary-address 192.48.1.2 255.255.255.0
metric 1
Use the no version to stop advertising a summary address on the interface.
See ip dvmrp summary-address.
Chapter 4: Configuring DVMRP

Configuring DVMRP Summary Addresses

131

Advertisement

Table of Contents
loading

Table of Contents