Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 163

show ip dvmrp route
Neighbor Major Version:
Neighbor Minor Version:
Neighbor Capabilities:
Neighbor State:
Geneneration ID:
Routes Received:
Bad Routes Received
Bad Packets Received:
Example 2
host1:v3#show ip dvmrp neighbor brief
Interface
atm5/0.14
atm5/0.15
See show ip dvmrp neighbor.
Use to display information about DVMRP routes.
Specify an IP address to display the best route to that address.
Specify an IP address and subnet mask to display the route that exactly matches
this IP address and subnet mask
Specify an interface type and specifier to display routes associated with that
interface. For details about interface types and specifiers, see Interface Types
and Specifiers in JUNOSe Command Reference Guide.
Specify the brief keyword to view a summary of information.
Field descriptions
Prefix IP address of the network
Length Length of the subnet mask for the network
usNbr/Owner IP address of the upstream neighbor associated with this
route or a description of the origin of the route
Dvmrp Local Route is associated with a directly attached network
Dvmrp Aggregate Route is an aggregate route determined by
summarization
Metric Metric associated with this interface for this route
ExpireTime Time, in seconds, until the VR starts the process for removing
the route
UpTime Length of time, in seconds, that the route has been in the DVMRP
routing table
Interface Type and specifier for the interface, such as atm3/0.
Example 1
3
255
Prune GenerationId
Active
0x3a13fbc2
1
0
0
NbrAddress UpTime Maj Min Cap
14.0.0.1 32
15.0.0.1 34
Chapter 4: Configuring DVMRP
Mtrace NetMask
State
3 255 PGMN Active
3 255 PGMN Active
141
Monitoring DVMRP