Juniper JUNOSE 11.0.X MULTICAST ROUTING Configuration Manual page 235

show ipv6 mld-proxy interface
host1#show ipv6 mld-proxy groups
Grp Address Interface
--------------- --------------- --------------
ff0e::1 ATM5/1.200
ff0e::2 ATM5/1.200
ff0e::3 ATM5/1.200
2001::1
ff0e::4 ATM5/1.200
ff0e::5 ATM5/1.200
2001::2
Counts: 3 <*,G>, 1 Exclude (1 sources), 1 Include (1 sources)
(5 total)
Example 2
host1#show ipv6 mld-proxy groups ff0e::1
Grp Address Interface
--------------- --------------- --------------
ff0e::1 ATM5/1.200
Counts: 1 <*,G>
(1 total)
Example 3
host1#show ipv6 mld-proxy groups count
Counts: 3 <*,G>, 1 Exclude (1 sources), 1 Include (1 sources)
(5 total)
See show ipv6 mld-proxy groups.
Use to display information about the interface on which you configured MLD
proxy.
To view information about a particular interface, enter an interface type and
specifier, such as atm 3/0. For details about interface types and specifiers, see
Interface Types and Specifiers in JUNOSe Command Reference Guide.
Specify the brief option to display a summary rather than a detailed description.
Field descriptions
Interface Type of upstream interface. For details about interface types, see
Interface Types and Specifiers in JUNOSe Command Reference Guide.
Address Address of upstream interface
Administrative state State of upstream interface in the software: enabled
or disabled
Operational state Physical state of upstream interface: enabled or disabled
Version MLD version on this interface
Chapter 6: Configuring Multicast Listener Discovery
Grp Mode
Include(1):
Exclude(1):
Grp Mode
Monitoring MLD Proxy
213