Table of Contents
Advertisement
Disabling and Removing DVMRP
disable
ip dvmrp
ip dvmrp disable
router dvmrp
Copyright © 2010, Juniper Networks, Inc.
Use the no version to disable the exchange of DVMRP unicast routes on an interface
not owned by DVMRP.
See ip dvmrp unicast-routing.
You can disable DVMRP on a VR or an interface without removing the configuration. You
can also remove DVMRP from a VR or an interface.
Use to disable DVMRP processing on a VR without removing the DVMRP configuration.
By default, DVMRP processing is enabled.
Example
host1:boston(config-router)#disable
Use the no version to reenable DVMRP processing on a VR.
See disable.
Use to activate DVMRP on an interface.
This command automatically creates and enables DVMRP processing on the current
VR.
Issue this command to identify this interface as one that DVMRP owns.
Example
host1:boston(config-if)#ip dvmrp
Use the no version to remove DVMRP from an interface.
See ip dvmrp.
Use to disable DVMRP processing on an interface without removing the DVMRP
configuration.
Example
host1:boston(config-if)#ip dvmrp disable
Use the no version to reenable DVMRP processing on an interface.
See ip dvmrp disable.
Use to create and enable DVMRP processing on a VR or to access Router Configuration
mode.
Example
Chapter 4: Configuring DVMRP
133
Advertisement
Table of Contents
