Configuring Martian Addresses (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual

Table 50: Fate Sharing Fields (continued)
Option
Group
Name
Comment
Cost
From

Configuring Martian Addresses (NSM Procedure)

80
Function
Specifies the name of the fate sharing
group.
Specifies the comment for the fate
sharing group.
Specifies the configurable cost
attributed to each group, which
represents the level of impact this group
has on CSPF computations. The higher
the cost, the less likely a backup path
will share any objects in the group with
the primary path.
Specifies the from address and to
address for point-to-point link objects.
Martian addresses are host or network addresses about which all routing information is
ignored. They commonly are sent by improperly configured systems on the network and
have destination addresses that are obviously invalid. You can configure a particular
martian address or a range of martian addresses as allowed or disallowed. You can use
the match criteria to configure a range of martian addresses.
To configure a martian address in NSM:
In the navigation tree, select
1.
In the Devices list, double click the device to select it.
2.
Click the
3. Configuration
In the configuration tree, expand
4.
Select .
5. Martians
Your Action
1.
2. Click the New button or select a
3. Enter the group name.
1.
2. Click the New button or select a
3. Enter the comment.
1.
2. Click the New button or select a
3. Enter the cost or select a value from
1.
2. Click the New button or select a
3. Specify the From address.
Device Manager > Devices
tab.
Routing Options .
Expand the Fate Sharing tree and
select .
Group
group and click the Edit button.
Expand the tree and
Fate Sharing
select Group .
group and click the Edit button.
Expand the tree and
Fate Sharing
select .
Group
group and click the Edit button.
the list.
Expand the Group tree and select
From .
group and click the Edit button.
.
Copyright © 2010, Juniper Networks, Inc.