Follow these steps to set the status of RADIUS servers:
To do...
Enter system view
Create a RADIUS scheme and
enter its view
Set the status of the primary
RADIUS
authentication/authorization
server
Set the status of the primary
RADIUS accounting server
Set the status of the secondary
RADIUS
authentication/authorization
server
Set the status of the secondary
RADIUS accounting server
Configuring the Attributes of Data to be Sent to RADIUS Servers
Follow these steps to configure the attributes of data to be sent to RADIUS servers:
To do...
Enter system view
Create a RADIUS scheme and
enter its view
Set the format of the
usernames to be sent to
RADIUS server
Set the units of data flows to
RADIUS servers
Set the MAC address format of
the Calling-Station-Id (Type 31)
field in RADIUS packets
Set the source IP address of
outgoing RADIUS messages
Use the command...
system-view
radius scheme
radius-scheme-name
state primary authentication
{ block | active }
state primary accounting
{ block | active }
state secondary
authentication { block |
active }
state secondary accounting
{ block | active }
Use the command...
system-view
radius scheme
radius-scheme-name
user-name-format
{ with-domain |
without-domain }
data-flow-format data { byte |
giga-byte | kilo-byte |
mega-byte } packet
{ giga-packet | kilo-packet |
mega- packet | one-packet }
calling-station-id mode
{ mode1 | mode2 }
{ lowercase | uppercase }
RADIUS scheme view
nas-ip ip-address
2-16
Remarks
—
Required
By default, a RADIUS scheme
named "system" has already
been created in the system.
Optional
By default, the RADIUS servers
specified with IP addresses in
the RADIUS scheme are all in
the active state.
Remarks
—
Required
By default, a RADIUS scheme
named "system" has already
been created in the system.
Optional
By default, the usernames sent
from the switch to RADIUS
server carry ISP domain
names.
Optional
By default, in a RADIUS
scheme, the data unit and
packet unit for outgoing
RADIUS flows are byte and
one-packet respectively.
Optional
By default, the MAC address
format is XXXX-XXXX-XXXX,
in lowercase.
Optional
By default, no source IP