Define Multi Pen - Xerox 6030 User Manual

Define Multi Pen

Sets the line width, color and other pen attributes for HPGL data for multiple pens. The
same parameters will be set for all other pen numbers within the range of specification.
Settings
The settings for this function are as follows.
Pen No.
Width
Color
End style
Joint style
These settings are only valid with HPGL data.
Menu Item
Specifies the starting number and ending number to cover the
range of the pens that are to be set up. The pen numbers are set
within a range of 0 to 98.
Sets the line width within a range of 0 to 511.
1 = 0.0635 mm.The actual width of the line will be n
the line width set to n. The default setting is [2].
Sets the line color at [BLACK] or [WHITE].
The default setting is [BLACK].
Sets the end of the line to [SQUARE], [ROUND], [EXTEND] or
[TRIANGLE]. The default setting is [SQUARE].
Refer to "End style" for further details (page 214).
Sets joint processing for lines to [UNJOINT], [BEVEL], [MITER]
or [ROUND]. The default setting is [MITER].
Refer to "Joint style" for further details (page 214).
Description
Text may not be printed cleanly if the line width is set to
[1].
This setting is only valid for HP-GL and HP-GL/2 EA, EP,
ER, FP, RA, RR and PE.
10.5 Logical Printer Settings
×
0.0635 with
215