Versatec Pen Style - Xerox 6030 User Manual

Versatec Pen Style

Sets the pen specifications for VCGL data.
Settings
The settings for this function are as follows.
Joint style
End style
Dashed line
style
Dashstyle
Example
Broken line style
Dot
216
Chapter 10 Basic Printer Machine Operations
These settings are only valid with Versatec VCGL data.
Menu Item
Sets joint processing for lines to [UNJOINT], [BEVEL],
[MITER] or [ROUND]. The default settings is [UNJOINT].
Refer to "Joint style" for further details (page 214).
Sets the end of the line to [SQUARE], [ROUND], [EXTEND] or
[TRIANGLE]. The default setting is [SQUARE].
Refer to "End style" for further details (page 214).
Sets broken line processing to [NO WRAP] or [WRAP].
The default setting is [NO WRAP].
NO WRAP
Each dot represents the start of the broken line.
Lines printed with the use of the broken line style shown in
the example will be printed as a non-broken line, as shown
in the illustration on the left. This is owing to the fact that
the dot appears before the line is broken, and this constitutes
the starting point for printing another line.
WRAP
Each dot represents the direction in which the broken line
must be printed.
Lines printed with the use of the broken line style shown in
the example will be printed as shown in the illustration on
the left .
Description
This setting is only valid when printing poly-lines, polygons
and rectangles.