Switching The Power On And Off - Xerox 6030 User Manual

1.4

Switching the Power On and Off

Both the scanner and the Printer are equipped with their own independent power
switches. It is necessary to ensure that the Circuit Breaker Switch is set to ON in order to
switch the power of the Printer on and off with the use of its own independent power
switch. Power will not be consumed when the Circuit Breaker Switch is off, even if the
Printer's power plug is plugged into the power source.
Switching On the Power
[Operation]
Scanner Power
Switch
Never switch off the power while printing is in progress. Failure to observe this
may result in paper jamming in the higher-temperature areas of the machine.
1
Set the Remote Switch to [Connect]. Refer to
1.3 Main Components and Their Function.
W h e n t h e R e m o t e S w i t c h i s s e t t o
[Connect], and the Scanner Power
Switch is set to ON, the Main Power
Switch controls power to the Printer and
Scanner.
2
Ensure that the Scanner Power Switch is set to
ON.
1.4 Switching the Power On and Off
7