Xerox 6030 User Manual page 43

No. Name
1 Copier's Menu Screen
2 [Job in Memory] lamp
3 Screen Contrast Dial
4 <Custom Presets/Meter
Check> key
5 <Power Saver> key
6 Keypad (0 to 9, C)
7 <Menu> key
8 <Stored Job> key
9 <Copy From Memory> key
10 <Clear All> key
11 <Interrupt> key
12 <Stop Copy> key
13 <Stop Document> key
14 <Low Speed Scanning> key
15 <Start> key
16 <Sample Copy> key
17 <Media Cut Mode> keys
18 Manual/Auto key
19 [Media Size/Media Type]
screen
Sets up the various functions. Also displays messages.
Illuminated when accumulated documents reside in the
memory.
Adjusts the contrast of the control panel.
Sets up the specifications for the machine. Also enables meter
confirmation.
Moves to and returns from the low power mode.
Enters the number of copies to be made and the parameter
values. The <C> key clears all entered values when pressed.
Currently not supported.
Registers settings that are commonly used in the memory.
Reprints the most recently copied data. The lamp will be
illuminated when additional copies are being printed from the
memory.
Cancels all function settings and returns them to the default
settings.
Enables interruption of copying. The lamp on the left-hand
side will be illuminated during interruptions.
Ejects all copies currently being processed and stops the
machine.
Stops media from being fed.
This key is pressed to enter the low-speed scan mode. The
lamp will be illuminated during low-speed scanning. Used to
prevent damage to the original document that may be fragile.
Starts document scanning when in the manual start mode. Is
also used to start operations for printing copies from the
memory and sample copies.
Enables the settings for a certain part of the document to be
changed and a sample copy printed. The lamp on the left-hand
side will be illuminated during sample copying.
Sets the method for cutting media. The lamp on the left-hand
side of the specified media cut method will be illuminated.
Switches between the automatic mode and the manual mode.
Displays the paper size and paper type in each tray.
Function
2.2 Using the Control Panel
15