Using The Setup Screens - Xerox 6030 User Manual

Using the Setup Screens

This section provides explanations on the various functions and buttons available on the
setup screens.
Message area
Default value check
Message area
Displays messages relating to the status of the machine and operation guidance.
Default value check
A check will be displayed in this box to indicate that the functions have been set up on
the setup screen and the default values have been changed.
Tab
By pressing the tabs, it is possible to switch between each of the menu setup screens.
Press the [Other Functions] tab to display a list of menus for all functions.
Number of copies
This value is entered by pressing the <0> to <9> keys (keypad) on the control panel.
Press the <C> key to return the settings to <1>.
Ready to copy.
Auto-Mode Document
Image Type
A0 A1
A0 A0
A1 A1
Paper
Size
A2 A2
A3 A3
A4 A4
It is possible to change the menus that are displayed on the tabs. Refer to the "Switch
Feature Buttons" section in "7.3 Setting up the Copy Specifications" of this manual
for further details (page 118).
Tab
Set
Sharpness Other
Functions..
Document Size
A2 A3 A4
A0 A0 A0
A1 A1 A1
A2 A2 A2
A3 A3 A3
A4 A4 A4
2.2 Using the Control Panel
Number of copies
1
17