Setting Up Media; Settings - Xerox 6030 User Manual

2.3

Setting up Media

The media parameters must be set up when new media are loaded and when the type and
size of existing media are changed. The media settings are made from the control panel.

Settings

The following parameters are set.
Settings
Size Series
Media Type
The media that can be set with all size series are as follows.
Size Series
ISO A series
SP. A-1 series SP. A-0 (880
SP. A-2 series
SP. A-3 series
19
Chapter 2 Knowing Your Copier
The media settings can also be made from the printer control panel. Refer to the
Printer User Guide for details on setting up parameters from the printer control
panel.
The size series is selected from [ISO A], [SP. A-1], [SP. A-2],
[SP. A-2], [ARCH] and [ANSI].
The media type is selected from [Bond], [Vellum], and [Film].
Weight The weight is selected from [Light], [Ordinary], and [Heavy].
A4 (210
A3 (297
A2 (420
A1 (594
A0 (841
SP. A-1 (625
SP. A-2 (440
SP. A-3 (312
SP. A-1 (620
SP. A-2 (435
SP. A-3 (310
ARCH 36", 24", 18", 12", 9"
ANSI
34", 22", 17", 11", 8.5"
Eligible Values
Eligible Media
×
297 mm)
×
420 mm) A3 roll media (297 mm wide)
×
594 mm) A2 roll media (420 mm wide)
×
841 mm) A1 roll media (594 mm wide)
×
1,189 mm) A0 roll media (841 mm wide)
× 1,230 mm) SP. A-0 roll media (880 mm wide)
× 880 mm) SP. A-1 roll media (625 mm wide)
× 625 mm) SP. A-2 roll media (440 mm wide)
× 440 mm) SP. A-3 roll media (312 mm wide)
×
871 mm) SP. A-1 roll media (620 mm wide)
×
620 mm) SP. A-2 roll media (435 mm wide)
×
435 mm) SP. A-3 roll media (310 mm wide)