Xerox 6030 User Manual page 201

VPI (optional)
PORT SETTING
VPI
VPI
Job Separation
Job Separation
YES
Printing Out a List of Settings
It is possible to print out a list of settings. The operational flow for this procedure is
explained below.
MENU
PORT SETTING
PORT SETTING
PRINT CONFIG
PRINT CONFIG
SET : to Print.
1
2
3
*
1
2
3
9.1 Setting up Communication Parameters
Display [VPI] on the setup item selection
screen, and then press the <
Select the item that is to be set up with the use of
the < > and < > keys, and then press the
< > key.
[REPORT OFFLINE], [EOP Timeout], and [Job
Separation] will be displayed in this order.
Select the parameters with the use of the < >
and < > keys, and then press the <Set> key.
An [*] mark will be displayed on the right-hand
side of the parameters once they have been set.
Press the < > key with [PORT SETTING]
displayed.
Select [PRINT CONFIG] with the < > key,
and then press the < > key.
Press the <Set> key when [SET: to Print.] is
displayed.
The list of settings will be printed.
> key.
173