Xerox 6030 User Manual page 298

Mapping
A2
Media
MANUAL
Media.
A0
Media.
A1
SPLIT
EDIT HPGL
SPLIT
SPLIT
YES
Split Mode
Length
Length
01189 mm
270
Chapter 11 Setup Using the Printer Control Panel
*
*
1. Select either [Auto] or [MANUAL], and then
2. Press the <
3. Select the paper size with the use of the < >
*
1
:06
2
*
3
4
*
When [Mapping] has been selected
Select the paper size with the use of the < >
and < > keys, and then press the <Set> key.
When [Media] has been selected
press the <Set> key.
> key if [MANUAL] has been
selected to move to the paper size setup
screen.
and < > keys, and then press the <Set> key.
Display [SPLIT] on the setup item selection
screen, and then press the <
Select whether or not to perform fragmentation
printing with the use of the < > and < > keys,
and then press the <Set> key.
Press the < > key once the selection has been
set if fragmentation printing is to be carried out.
Select the item that is to be set up with the use of
the < > and < > keys, and then press the
< > key.
The [Length], [Page No] [Margin] and [Mark]
parameters will be displayed in that order.
Select the parameters with the use of the < >
and < > keys, and then press the <Set> key.
> key.