Xerox 6030 User Manual page 335

Data connection error
Status: A data connection error occurred during file transfer.
Action: Establish connection and transfer the file again.
Directory non existent or syntax error
Status: A non-existing directory (logical printer) is specified.
Action: Specify the correct directory (logical printer).
Error in input file
Status: An error occurred in an output file during transfer.
Action: Establish connection and transfer the file again.
File "xx" not found or permission problem
Status: Failed to open or read a parameter file corresponding to the logical printer specified
by the ls command.
Action: Wait for some time and try again.
Insufficient storage space in system, please try later
Status: Cannot transfer data because the hard disk is full.
Action: Wait until a space is reserved on the hard disk, and start transfer again.
Invalid command
Status: An invalid command is received.
Action: Transfer the correct command.
Job queue is full, please try later
Status: Cannot receive data because the job queue is full.
Action: Wait for some time and try again.
12.3 Printing Using the ftp Command
307