Specifying R/E Percentages For Copy Purposes - Xerox 6030 User Manual

4.5
Specifying R/E Percentages for Copy
Purposes
Specifies the percentage that the image is to be enlarged or reduced for copy purposes.
100%
R/E Presets
Variable
Operation Procedure
1
Select [Normal R/E] from the
copier's menu screen.
52
Chapter 4 Copy Functions
Copies the image at the same percentage rates.
Enables the percentages to be selected from six different preset
types.
Enables any required percentage rates within a range of 25% to
400% to be specified in increments of 0.1%.
• The manual mode will be automatically activated if [Normal R/E] is selected when
in the auto mode. If the auto mode is specified after the [Normal R/E] values have
been set, all settings will be invalidated
• The [R/E Presets] percentages can be changed with the custom presets function.
Refer to the section on "R/E Preset" in "7.3 Setting up the Copy Specifications" in
this manual for further details (page 118).
Document
Select the [Other Functions] tab
if the item to be selected is not
displayed on the screen.
Reduced to 80%
Enlarged to 150%
Auto-Mode Document
Image Type
Normal R/E... R/E by L&W...
Media Cut Image
Mode... Density...
Image Image
Edge Erase...
Location... Location...
Contrast
Mirror Image
Reversal
E-Sorter... Multi-Job...
There is a following page
Normal R/E
Sharpness Other
Functions..
Media Supply..
Background
Suppression...
Scan Start
Position...
Threshold
Level...
Previ-
Next
ous