Size Recognition Priority - Xerox 6030 User Manual

Size Recognition Priority

Sets whether images that are within the A0 size (length:1,189 mm) but that exceed the
standard size are to be output on one size larger standard size paper, or if they are to be
output on a standard size that has been increased by a multiple of whole numbers.
This setting is useful when all images are to be output on the same size of standard
output paper or on a standard size that has been increased by a multiple of whole
numbers.
In the case of an input image that
is longer than the standard size
Settings
The settings for this function are as follows.
Menu Item
Size
Recognition
Priority
This setting is only valid when the [Paper Size] on the [Output Option] has been set to
[MIX].
(example: 420 × 650mm)
Description
Sets up the size recognition priority mode.
The default value is [Standard long size output].
[Standard long size
output]
[Priority to standard size]
Standard size priority
Output on the standard size
(example A1: 594 × 841mm)
Increased standard size
Output on the standard size
increased by a multiple of
whole numbers
(example 2A2: 420 × 1,188mm)
Output image
Outputs images that are within the A0 size
but exceed the standard size on one size
larger standard size paper.
Outputs images that are within the A0 size
but exceed the standard size on standard
size paper that has been increased by a
multiple of whole numbers.
10.5 Logical Printer Settings
241