Xerox 6030 User Manual page 196

SNMP
The following communication parameters need to be set up.
SNMP
Community
String
Trap Transmission
Destination
Transmission Port
Version
Permanence
168
Chapter 9 Printer Setup
SNMP can only be set up from Print Services on Web.
Menu Item
Sets whether to enable SNMP or not.
Sets the Community String to be imbedded when the client
transmits SNMP packets.
Sets the IP address of the destinations (trap transmission
destinations) to which notifications are to be sent in the event
of an error occurring with the printer.
A maximum of 128 trap transmission destinations can be
saved.
Sets the port numbers of the trap transmission destinations.
Sets the version of the trap to be transmitted.
Sets whether the trap transmission destination information is to
be stored or not after the printer has been switched off. A
maximum of eight items can be enabled for permanence.
Description