Other Errors; Multi Sheet Picks - Xerox Phaser 3330 Service Manual
Hide thumbs
Also See for Phaser 3330:
- User manual (114 pages) ,
- System administrator manual (92 pages) ,
- Quick use manual (5 pages)
Table of Contents
Advertisement
Other Errors
Multi Sheet Picks
Multiple sheets of paper are picked from the tray at the same time.
Initial Actions
•
Turn the printer off and then on again.
•
If the problem persists continue troubleshooting.
Troubleshooting Reference Table
Applicable Parts
• Pick Up Roller (PL 3.1A.45,
Frame (2 of
2))
• Retard Roller (PL 5.1.7,
1)
• Feed Roller (PL 3.1A .8,
Frame (2 of
2))
• Pick Up Clutch (PL 3.1A.10,
3.1A Frame (2 of
2))
• Main PWB: Phaser 3330 (PL 1.0.7,
List 1.0 Phaser 3330
3335 and 3345 (PL 6.1.7,
WorkCentre 3335/3345
Troubleshooting Procedure Table
Step
Actions and Questions
1.
Remove debris in the paper path. Clean the
Pick Up, Retard, and Feed Rollers. Replace
any worn or damaged rollers.
Does the problem persist?
Xerox Internal Use Only
Wiring and Plug/Jack Map Reference
Parts List 3.1A
• Phaser 3330 Main PWB Connector Designators
• Phaser 3330 Control Panel PWB
Parts List 5.1 Tray
• Wiring Diagrams for P3330/WC3335/WC3345
• WorkCentre 3335/3345 Main PWB Connector Designators
Parts List 3.1A
• DADF PWB
• SMPS PWB
Parts List
Parts
Main), WorkCentre
Parts List 6.1
Main).
Yes
Replace the Pick Up
Clutch (PL 3.1A.10,
Parts
List 3.1A Frame (2 of
2)).
Phaser 3330 and WorkCentre 3335/3345
Troubleshooting
No
Complete.
2-81
Service Manual
Advertisement
Table of Contents
Troubleshooting
