Xerox 6030 User Manual page 242

End style
Line width
Half the line width
Line width
Half the line width
Line width
Half the line width
Joint style
214
Chapter 10 Basic Printer Machine Operations
SQUARE
The normal method of ending lines.
ROUND
Rounds off both ends of the line with a half radius of the line
width.
Half the line width
EXTEND
Adds half of the line width in length to both ends of the line.
Half the line width
TRIANGLE
Adds a triangle that is half of the line width in length to both
ends of the line.
Half the line width
UNJOINT
Does not join up the lines.
BEVEL
Joins the outside corner of one line to the outside corner of
the other line.
MITER
Extends the outside corners of both lines until they meet in a
miter.
ROUND
Rounds off the area where the two lines meet.