Xerox 6030 User Manual page 207

Menu Item
Low power mode1
Low power mode2
Sleep Mode
Job Recovery
Sets the time (1 to 120 minutes) for moving to low power
mode 1.
Low power mode 1 is the mode that automatically reduces
t h e t e m p e r a t u r e o f t h e f u s e r a n d r e s t r i c t s p o w e r
consumption.
The default setting is [5] minutes.
Sets the time (2 to 120 minutes) for moving to low power
mode 2.
Low power mode 2 is the mode that reduces the temperature
of the fuser even further than low power mode 1.
The default setting is [15] minutes.
Sets the sleep mode at [ON] or [OFF] and sets the time (15
to 120 minutes) for moving to the sleep mode.
The sleep mode automatically switches off the power of the
printer.
The default setting is [90] minutes.
Sets how the jobs that remained in the queue when the power
of the printer was shut off are to be processed when the
printer is started up again. The default setting is [OFF].
[OFF] Jobs that have not been output when the
power is shut off are canceled and not
printed.
[QUEUED] Prints out only the [Queued] jobs for
which processing has not been started.
[ALL] Prints out all jobs for which output has
not yet been completed.
• When [ALL] has been selected, a ten-page job will be
reprinted from page one when the power is restored to
the printer, even if pages 1 to 9 were already output
before the power was shut off.
• The sequence in which jobs will be output after the
power has been restored will be in accordance with
the ID numbers assigned when each job was received.
9.2 Setting up the System Parameters
Description
179