Switching Off The Power - Xerox 6030 User Manual

Switching Off the Power

Switch off the power following the steps shown below.
[Operation]
Main Power
Switch
Scanner Power
Switch
Never switch off the power while printing is in progress. Failure to observe this
may result in paper jamming in the higher-temperature areas of the machine.
Circuit Breaker
1
Set the Main Power Switch to OFF.
When t he Remo te Swit ch is set to
[Connect], and the Scanner is set to ON,
the power of the Printer and Scanner
can be switched on/off with the Main
Power Switch.
2
Set the Scanner Power Switch to OFF.
3
Set the Circuit Breaker Switch to OFF.
Switch off the Circuit Breaker Switch
when the machine is not to be used for
long periods of time.
1.4 Switching the Power On and Off
9