Printer Mode
The printer mode is activated when print data is transmitted from an external host to the
printer. The machine will revert to the copier mode once printing has been completed.
Printing in progress.
Press [Interrupt] to make copies.
Printer
Scanner Mode
The scanner mode is activated when a signal is received from the host PC. Images
scanned with the scanner are transmitted to the host PC when in the scanner mode.
An instruction is required from the host PC to cancel the scanner mode.
Ready to Scan.
To stop scanning,
operate from external device.
Scanner
Pending Jobs : 0
Press the [Interrupt] key to switch to the copier mode when print processing is in
progress. Refer to "3.2 Interruption Copying" in this manual for more further details
(page 35).
1. Load documents face down.
2. Control scanning from
external device.
Refer to "Chapter 6 Scanner Functions" in this manual for more details on the
scanner functions (page 99).
1
Scanning in progress...
Scanner
Ready to send data to
external device.
23
2.4 Functions